Perspex® Bronze/Grey Tinted Cast Acrylic Sheet

Yes, of course. Orders can be collected from our premises in Colchester, Essex. At the final stage of the checkout process there is a delivery option labelled "Collection/pickup" which is free. Once your order is complete, you will be notified by email along with our address and collection times.

Yes. We offer an express delivery service which aims to deliver all orders in 1-3 working days. Orders are delivered by a recognised courier company and may require a signature on delivery.

This is a question we are asked fairly regularly due to the previlance of either a minimum order charge or small order fee within the industry.

At Simply Plastics our approach has always been to treat all orders equally, small or large. We want all customers, new and existing, to be able to place orders with us confident that they are only paying for the products and materials that they require. We therefore do not have a minimum order charge or small order fee. 

Acrylic should not be cleaned using chemical cleaners because they can cause damage to the acrylic. We recommend cleaning acrylic sheet with warm soapy water and a soft cloth. There are various acrylic cleaners and polishers available which we can provide that keep acrylic looking like brand new.

Acrylic sheet can be cut using a circular saw, a jigsaw or any type of saw with a fine tooth blade. We recommend laying the acrylic flat on a firm surface, such as a workbench, and clamping it down before cutting. If you are using clamps to hold the material down, we suggest placing wood between the clamps and acrylic sheet to prevent any damage to the surface of the acrylic. Manufacturer safety precautions should always be followed when using any type of saw. Please read our "how to cut acrylic sheets" blog post for more detailed information.

The Perspex brand has become synonymous with the manufacture of the highest grade acrylic available. It's clear Perspex sheet transmits 92% of all visible light (unmatched by any other manufacturer), is internationally recognised as a safety glazing material meeting the requirements of ANSI Z.97 and BS 6262, offers a ten year weathering guarantee and is manufactured right here in the UK. Perspex also boasts market leading environmental credentials having committed to meeting a detailed set of environmental targets by 2020.

Perspex is also very well known for the wide range of materials and colours it offers which is again unmatched by any other acrylic manufacturer. To the best of our knowledge, we stock and supply the widest range of Perspex colours in the UK including clear cut to size acrylic, high gloss coloured acrylic, frosted, fluorescent, matte effect naturals, metallic, tinted and their latest offering - the sweet pastels range. All of these materials are available cut to size and ready for application.

When we cut an acrylic sheet to size, the saw blade/router toolbit produces a matte finish on the edges of the panel. We use a technique called diamond polishing to polish the edges to a bright, smooth and glossy finish.

Our diamond edge-polishing machine polishes the edge of acrylic by running a rotating, diamond tipped wheel along the edge of the material.

You can read more about the techniques used to polish Perspex® in our blog post, The Ultimate Guide to Polishing Perspex®.

These two terms are pronounced the same and spelt almost identically, however, Plexiglass is the genericized trademark or proprietary emponym that has become synonymous with acrylic sheeting in most of Europe and North America whereas Plexiglas® is the brand name for acrylic sheets manufactured by Röhm GmbH in Germany. Whilst Plexiglass has become the generic trademark for acrylic sheets in Europe and North America, the brand name Perspex® is synonymous with acrylic sheeting in the UK.

Both Plexiglas® (most commonly spelt Plexiglass) and Perspex® are brand names of Acrylic sheet. Röhm GmbH, based in Germany, are the manufacturers of Plexiglas® whereas Perspex® is manufactured in the UK by Perspex International Limited. Both manufacturers supply a wide range of colours and thicknesses. Whilst the brand names Plexiglas® and Perspex® are different, ultimately the acrylic sheet that they manufacture is the same albeit each manufacturer might tweek the formulation to increase or enhance UV-resistance, light transmission or colour.

When deciding whether Cast Acrylic or Extruded Acrylic is best for your project it’s worth considering the specific application and desired finish you hope to achieve. The table below provides some examples of the most suitable type of acrylic sheet to use for specific applications.

In our experience, whilst some projects/applications will require specific characteristics of either Cast or Extruded Acrylic, in most cases the choice can be made based on either colour, thickness or cost, as below:

• Clear or Colour: Extruded acrylic is generally only manufactured in clear, black and white and therefore if there is a requirement for any other colour, Cast Acrylic is the only choice.
• Thickness: Cast acrylic is commonly manufactured in thicknesses up to 100mm whereas extruded is generally available in a maximum thickness of 20mm (Simply Plastics stock up to 50mm in Cast and 10mm in Extruded).
• Cost: Extruded is marginally cheaper and therefore any requirement for a large quantity of sheets/panels, where the benefits of cast acrylic are not important, is likely to be more cost effective produced in Extruded acrylic.

All of the different types of plastics that are available on our website, whether they be a panel, a disc, tube or rod, show the weight of the piece you require once you have entered your dimensions, shown in grams or kg.

The weight of any plastic can be calculated using the simple formula: Weight = Volume x Density

Read our blog post on how to calculate the weight of a variety of different plastics covering panels, discs, road and tube.